Versions Compared

Old Version 11

changes.mady.by.user HJ Lee

Saved on

compared with

New Version Current

changes.mady.by.user Brandyn Mowat

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



Supported Vehicles:

Porsche 718 (982) 

  • 2017-2024 Porsche 718 Cayman (982) MT/PDK WM
  • 2021-2023 2024 Porsche 718 Cayman (982) T MT/PDK WM
  • 2017-2024 Porsche 718 Boxster (982) MT/PDK WM
  • 2021-2023 2024 Porsche 718 Boxster (982) T MT/PDK WM


Map Versions982 Base982 S982 GTS
Stage0v310v310v310
Stage1v310v310v310


Required Accessport Firmware:

  •  AP3-POR-010:  1.7.5.0-25090

Map Availability:




Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with "93" are for use with 93 and 94 octane/98 RON fuel or better.
  • Maps designated with "91" are for use with 91 and 92 octane/95 RON fuel or better.


Warning

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 












Stage 1 91 718 Base

Stage 1 93 718 Base





718 (982) Base 2.0TPeak GainsMax Gains
Stage1 91

+9.30% HP, +4.29% TQ

+11.26% HP, +11.21% TQ 
Stage1 93

+14.95% HP, +7.59% TQ

+15.99% HP, +16.19% TQ 

Results may vary 


Stage 1

  • Exhaust Requirements: Stock
  • Intake Requirements: Stock air box with stock, K&N, or BMC air filter 


Stage 0

  • Stock calibration. Factory map that the car was delivered from Porsche with. Does not uninstall Accessport.


Warning

OTS Maps are not compatible with iPE Exhaust systems or any other valved exhaust system that isn't controlled by the factory computer.




Peak Gains are measured as the absolute maximum value between the highest points of two plots.
Max. Gains are measured as the average maximum value between the highest and lowest point of two plots.

Note

Dyno results and gains are from first party testing on external dyno and blended 93 octane due to lack of vehicle and fuel availability to COBB for in house testing.






Map Version Notes: 

Insert excerpt
718 (982) Map Versions
718 (982) Map Versions
nopaneltrue