Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Supported Vehicles:

  • Volkswagen Golf R 2017-2019 2020 (USDM and World Market)

    • Supported Definition Files:
      • Volkswagen Mk7 7 Spd DSG 0GC300012A
      • Volkswagen Mk7 7 Spd DSG 0GC300012M
      • Volkswagen Mk7 7 Spd DSG 0GC300014B

Map Revision:

 V100 


Map NameCurrent Version
Simulated Stockv100
COBB OEM+v100
COBB Sportv100

COBB Aggressive

v100




DSG Tuning Activation: 

  •  If you did not initially purchase your Accessport with DSG support, please contact the COBB Tuning customer service team via phone or email.  

Required Accessport Firmware:

  •  AP3-VLK-003-DSG: 1 1.7.3.0-16029 19550 or greaterhigher

Map Availability:

ECU Map Note Locations:




Requirements: 

  • Use of inappropriate calibration/modification combinations may promote transmission damage.


MK7 GOLF R DSG

  • Axle Torque Per Gear Mapped for Maximum Acceleration

Stock Turbo:

Image Removed

The shift points at full throttle have been selected based on achieving the maximum torque to the wheels based on dyno results recorded at COBB HQ.


  • Summary
    • COBB Aggressive v100
      OEM+ Features along with optimized standard drive mode shift schedules. ~2200 to 2400 RPM minimum upshift points compared to 1100 to 1500 RPM stock. SPORT mode remains stock

    • COBB Sport v100
      OEM+ Features along with optimized standard drive mode shift schedules. ~2000 RPM minimum upshift points compared to 1100 to 1500 RPM stock. SPORT mode remains stock

    • COBB OEM+ v100

      Torque limits removed. Gear display enabled in all modes. Shift delay in manual removed.Shift time decreased. Shortened Shift Times. Kick-down downshift disabled in manual mode. Launch Counter / Limiter Disabled. Shift schedules remain STOCK.
    • Simulated Stock v100
      Simulated Stock Calibration. For use when stock-like behavior is desired. DOES NOT UNINSTALL ACCESSPORT FROM THE ECU. 




Closing Warnings and Precautions:

  • Use of inappropriate calibration/modification combinations may promote transmission damage.




Revision Notes:

V100

  • Initial Release Calibration.