Mazdaspeed Advanced Tuning Adjustments

Applicable Vehicles:

06-07 Mazdaspeed6
05-06 Mazda6 MPS
05-06 Mazdaspeed Atenza
07-13 Mazdaspeed3
06-11 Mazda3 MPS
06-11 Mazdaspeed Axela

Version 3 Accessports with qualifying firmware now have the ability to adjust Wategate Duty Cycle, Launch Control, and Flat Foot Shifting. By default these features are disabled.  If you wish to use the Advanced Tuning features please see the attached guide.

Mazdaspeed Accessport - Advanced Tuning Settings

Version 3 Accessports with qualifying firmware now have the ability to adjust Wastegate Duty Cycle, Launch Control, and Flat Foot Shifting. (Firmware update instructions)  By default, these features are disabled.  If you wish to use the Advanced Tuning features, use the guide below.

Here is how to enable them:

On the Accessport main menu, scroll to Tune and click the middle button.

Next, scroll up until you see a green arrow next to Setup and click the middle button.

On the next screen, select Advanced Tuning Settings  by pressing the middle button.

You will then see options to enable Flat-foot Shifting, Launch Control, and Wastegate adjustments.  A green bubble to the left indicates that the option is selected to be enabled.

Once the desired options have been selected, you will need to reflash the ECU by either changing the map or reflashing the current map file.  During that process, follow on-screen instructions to set up selected Advanced Tuning parameters.

If you have any questions or issues with these settings please contact Cobb tech support at support@cobbtuning.com or by phone at 1-866-922-3059.