Versions Compared

Old Version 1

changes.mady.by.user Brandyn Mowat

Saved on

compared with

New Version 2

changes.mady.by.user Brandyn Mowat

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Part Number - Part Name

Vehicle Coverage

Congratulations on your purchase of the COBB Tuning xxxxxxxxxxxxxxAir Oil Separator for EcoBoost Mustang! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Table of Contents

Parts List

Expand
titleAOS Can Assembly

Expand
titleEngine Spacer Plate

Expand
titleAOS Bracket for EBM

Expand
title(4') 5/8" Emissions LIne

Expand
title(1') 1/2" Fuel Evap Hose

Expand
title(2) -10 ORB barb fittings with o-ring

Expand
title-6 ORB barb fitting with o-ring

Expand
title(1) 5/8" Constant Tension Spring Clamp

Expand
title(4) 25/32 Constant Tension Spring Clamp

Expand
title(4) 15/16" Constant Tension Spring Clamp

Expand
title(2) 1/2" to 3/8" barbed reducer

Expand
titleM6 x 1.0 x 16mm Hex Bolt

Expand
titleM6 x 1.0 x 30mm Hex Bolt

Expand
title3/4" Aluminum Spacer

Expand
titleM6 x 1.0 Nylon Locking Nut

Expand
title(3) M6 Stainless Washers

Expand
title(8) M6 x 1.0 x 40mm Hex Bolt

Expand
titleBreather Plate Gasket

Expand
title(3) M4 x 1.0 x 8mm Button Head Screws

Expand
titleO-Ring Lube

Tools Needed

Sockets

3/8"

  • 3/8" ratchet

  • 3/8" 12" extension

  • 3/8" 6" extension

  • 3/8" Socket Swivel

  • 3/8" 7mm socket

  • 3/8" 8mm socket

  • 3/8" 10mm socket

  • 3/8" 12mm socket

  • 3/8" 13mm socket

  • 3/8" 10mm deep socket

  • 3/8" 4mm Allen Socket

Hand Tools

  • Phillips head screwdriver

  • Trim removal tool

  • Pick

Wrenches

  • 10mm combination wrench

Section 1

Section 2

Section 3

Section 4

Section 5

CARB Sticker Application

(Where Applicable)

  1. Apply the supplied CARB sticker in a clear, easy to find location.  Typically underhood, or on the radiator core support.

Links

MAP Notes

Helps to figure out which map you should be on given the parts installed to your car 

Links for related parts