Page Comparison

...

In order to bring your maps forward, you’ll need to import all of your table changes into a COBB CCF (Custom Features Gen3) ROM

1. Open a CCF Gen 3 File
   

   Image RemovedImage Added

   
   

2. Under the FILE heading, select Import Tables From Map. You’ll be presented with a list of table differences, go ahead and import those to your new map file.
   

3. At this time, once the import is done, you’ll want to review the changes made to make sure nothing was missed. Sometimes if table sizes are different or the datatype has changed tables won’t be copied at all (or incorrectly). This is more common when comparing or importing between model years or different vehicles. It’s a good idea to do this comparison with two different windows of ATP in the event that the incompatibility that makes the changes not import, says that the tables are identical with the compare function when they are not.
   

4. You’ll need to set values for the new NexGen Flex Fuel tables.
   Custom Sensor Input Activation (0 = Disabled, 1 = Enabled)

   Custom Sensor Input Calibration

   Custom Sensor Input Smoothing Factor

   Ethanol Sensor Activation

   Ethanol Sensor Concentration Override Always (0 = Disable, 1 = Enable)

   Ethanol Sensor Concentration Override Always (0 = Disable, 1 = Enable)

   Flex Fuel Feature Activation (0 = Disable, 1 = Enable)

   Fuel Pressure Activation (0 = Sensor Disabled, 1 = Enable)

   Fuel Pressure Differential Feature (0 = Disable, 1 = Enable)

...